In the industrial business there are a lot of safety requirements set. One of these often is to check the thickness of the metal/steel in, for example, fuel tanks. In the years of usage this changes due to rust, wear and tear, etc.
MRC Rental has a gauge that can measure the thickness of the ‘wall’. This way you can evaluate if the ‘wall’ is thick enough or if you might need to renew, repair or take other actions to meet the requirements.
The Ultra-soon gauge can measure with or without painting coat. Every time the machine is used it will be calibrated to make sure the measurements are as accurate as possible. As link between machine and steel/metal we use a special coupling fluid for the transmission of the ultrasonic sound.
After measuring on side, you will receive a report with all the measurement results.